AUTAC4
目录号 : KM8868 CAS No. : 2267315-04-6 纯度 : 98%

AUTAC4 是一种靶向线粒体的自噬靶向嵌合体 (AUTAC)。AUTAC4 下调细胞质蛋白并通过线粒体自噬促进靶向线粒体更新。

规格 价格 是否有货 数量
5mg
In-stock
10mg 询价 In-stock
50mg 询价 In-stock

Other Forms of Rapamycin:

KKL Med 的所有产品和服务仅用于科学研究,不能被用于人体,兽医,我们也不向个人提供产品和服务。
生物活性

AUTAC4 is a mitochondria-targeting autophagy-targeting chimera (AUTAC). AUTAC4 downregulates cytosolic proteins and promotes targeted mitochondrial turnover via mitophagy.

体外研究

AUTAC4 induces K63-linked polyubiquitination. Accumulation of K63-linked polyubiquitin required approximately 8 h of incubation.
AUTAC4 suppresses not only cytochrome c release into the cytosol but also pro-caspase 3 cleavage. The intracellular ATP level after CCCP treatment is also maintained by AUTAC4, suggesting that mitophagy acceleration by AUTAC4 restored energy production by improving mitochondrial quality control. AUTAC4 rescues cells with acute mitochondrial injury by promoting mitophagy.
With the use of mito-Rosella, AUTAC4 (10 μM) can induce mitophagy in Detroit 532 cells ~24-72 h after treatment.

分子式
C43H48FN9O8S
分子量
869.96
CAS号
2267315-04-6
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式

-20°C, protect from light

*In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)

溶解性数据
In Vitro: 

DMSO : 200 mg/mL (229.90 mM; Need ultrasonic)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 1.1495 mL 5.7474 mL 11.4948 mL
5 mM 0.2299 mL 1.1495 mL 2.2990 mL
10 mM 0.1149 mL 0.5747 mL 1.1495 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (protect from light)。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: ≥ 4.25 mg/mL (4.89 mM); Clear solution

    此方案可获得 ≥ 4.25 mg/mL (4.89 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 42.5 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: ≥ 4.25 mg/mL (4.89 mM); Clear solution

    此方案可获得 ≥ 4.25 mg/mL (4.89 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 42.5 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

  • 3.

    请依序添加每种溶剂: 10% DMSO    90% corn oil

    Solubility: ≥ 4.25 mg/mL (4.89 mM); Clear solution

    此方案可获得 ≥ 4.25 mg/mL (4.89 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 42.5 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

The molarity calculator equation
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
The dilution calculator equation
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
在线客服
咨询热线
400-881-9290
关注微信公众号